MD11L

MD11L以超低的接地比压,主要用于水电工程,水稻田平整,鱼虾塘改造,河滩和池塘、垃圾填埋等湿地、泥泞和松软工况环境作业。
产品咨询热线:0379-64966661/16668080095


型号ModelMD11L
发动机类型Engine type4缸、水冷、国四
发动机标定功率kW(hp)Rated power kW (hp)81(110)
发动机转速(rpm) Engine speed2200
转向离合器Clutch湿式
档位Gears2F+2R
速度范围(km/h) Speed range2.35-5.10
工作装置液压系统最高工作压力(MPa)17.5
工作装置液压系统流量L/min100
外形尺寸(L*W*H)(mm) Overall dimensions4650*3550*2800
履带中心距(mm)2030
履带板宽度(mm)1050
履带板数量(单侧)50
接地比压(KPa)15
托链轮数量(个)2
支重轮数量(个)8
爬坡角度(°)30
离地间隙(mm) Ground clearance480
最小转弯半径(m) Min. turning radius2.2
铲刀宽度(mm)3550
铲刀高度(mm)650
铲刀提升高度(mm)1000
铲刀入土深度(mm)380
最小使用质量 (kg) Min. operating mass9000

主要特点:

MD11L以超低的接地比压主要用于水电工程,水稻田平整,鱼虾塘改造,河滩和池塘、垃圾填埋等湿地、泥泞和松软工况环境作业。

Key features:

MD11L is primarily used in hydropower projects, leveling of paddy fields, transformation of fish and shrimp ponds, operations in wetlands, muddy, and soft conditions such as riverbanks and ponds, as well as landfills, due to its extremely low ground pressure.

产品说明:

1、本机采用东方红与英国里卡多公司合资技术生产的柴油发动机,符合国家阶段排放要求,噪音低、扭距大、节能环保;

2、主离合器:采用干式、多片结构、常结合主离合器,具有扭距储备大,工作可靠等特点;

3、变速箱:变速箱为2F﹢2R机械换档变速箱,操作简单,维修方便,使用可靠;

4、先进的操纵控制系统,湿式后桥,液压转向,操纵灵活省力;

5、传动:采用直齿、大模数齿轮传动,具有承载能力强,可靠性高等优点;

6、优化后的行走机构及加强型底盘,采用了特殊材料,极大的提高了整机强度和耐冲击性。

7、采用新型人机工程学六面体驾驶室,空间大,视野好,密封严。

8、标配亮度更高的LED工作灯,提升夜间施工照明能力,更加安全可靠。

9、可选装后悬挂装置。

Product Dxplaination:

1, this machine adopts the East Red and the British Ricardo company joint venture technology production of fuel engine, in line with the national stage emission requirements, low noise, torque, energy saving and environmental protection;

2,The main clutch: It uses a dry, multi-scaled structure and is often combined with the main clutch, which has the characteristics of large torque reserve and reliable work.

3, gearbox: gearbox for 2F + 2R mechanical gearbox, simple operation, convenient maintenance, reliable use;

4, Advanced control system, wet rear axle, hydraulic steering, allowing for flexible and effortless operation.

5,Transmission: It adopts straight tooth and big module gear transmission with strong load carrying capacity and high reliability.

6,The optimized driving mechanism and reinforced chassis used special materials, which greatly improved the strength and impact resistance of the entire vehicle.

7,A new ergonomic six-sided cab is used, which has a large space, good view and a strict seal.

8,the standard with higher brightness LED work lights, improve the night construction lighting capacity, more safe and reliable.

9,A rear suspension device can be optional.


上一篇:MD12
下一篇:MD11S